RB-5 Bench top type
 |
- A change of a plan of R side processing and C side processing
is prepared easily.
- An appropriate feed speed can be chosen in accordance with the
quality of the material.
- The composition fitted to the use can be done by the optional
addition.
|
| The kind of machining |
R3,R2,,C2,C1, |
|
| With the chamfering size automatic compensation devices
of both sides |
| Thickness of a processible board |
Min 6mm to Max 36mm |
| Width of a processible board |
70mm to 500mm |
| Processing board length |
200mm to 4000mm |
| A power supply, capacity |
3PhaseA200‚u@3‚jvA |
| Use cutter |
Three sheet edge (right rotation) |
| Use tip |
The carbide R tip of exclusive use (standing stock) |
| The number of rotation |
2500/3000RPM 50/60Hz |
| Material feed speed |
300`3500mm/min |
| Machine dimension |
1100x1450x1400mm |
| Machine weight |
–ñ500kg |
| Option |
Automatic carrying in, carrying out device |
| Note |
It is exchanged for the special cutter of the option
and the R2 special chip, and it is decided that it has it processed
in case of R2 to R5 chamfering. |
| It is exchanged for the special roller of the option
and the chip only for C chamfering, and it is decided that it has
it processed in case of C1 to C5 chamfering. |
|
